With the continuous development of charcoal technology ly2014.12 surgery, today is no longer the old-fashioned method of making charcoal. In the production of charcoal, charcoal, these wood, wood raw material pretreatment, such as crushing and screening, drying, and then fed into the charcoal, the material through the system of rods were pressing for carbonization to stick by carbonization furnace This is the practice of the process of charcoal. In the production of charcoal, we must first ensure that the raw material has the following conditions: 1, the raw material particles can not be greater than 3mm 2, the raw material needed in 15% humidity three different uses of charcoal, charcoal stick of different diameters, such as 50mm or 60mm above three conditions to ensure the charcoal production, but the last one charcoal carbonization process is, if the carbonation is not good, when in use will cause smoke, that is, we often say that the cooked stick, did not thoroughly carbonized charcoal, charcoal production and therefore every aspect is very important. Choose a good charcoal production equipment to produce good charcoal company's Web site:! Http: //www.zidongmutanji.com